[AMRadio] 1/4 in shaft insulators


John E. Coleman colemanj at sbcglobal.net
Sun May 25 12:49:49 EDT 2003


Also funny is how just about the time you think there are no more home
brewers you run up on some with the best ideas.

Thanks Mike and Tony
I will explore all the ideas

John, WA5BXO


-----Original Message-----
From: amradio-admin at mailman.qth.net
[mailto:amradio-admin at mailman.qth.net] On Behalf Of hogtamer
Sent: Sunday, May 25, 2003 11:25 AM
To: amradio at mailman.qth.net
Subject: Re: [AMRadio] 1/4 in shaft insulators

Hello John,

Funny how you find KNOWLEDGE in the most unlikely places!
First of all Phenolic is available from most any plastic
supply store ie:  Cadalliac Plastics, A-1 Plastic here in
the Houston area.

If you have any friends in the machine shop business, check
and see if they do Broaching. IF so then go see them with a
piece of Delrin (round stock) and see if they will Broach
you a 1/4" square hole thru the middle. Then you can simply
drill and tap holes on the Square sides for Set Screws and
you have your very solid Union which is RF proof.

For the "True" Home brew "ARTIST" you could buy either
Delrin or phenolic, Drill say a 3/16" hole thru the middle
then with a small SQUARE File which they sell at the
hardware store, you could make your own.  Alot of work but
would save you some bucks if that is what you are after.

Just a few ideas from, "Down By the River"!

Take care John,

Tony/W5OD
River House Radio
_______________________________________________
AMRadio mailing list
AMRadio at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/amradio





More information about the AMRadio mailing list

This page last updated 22 Feb 2018.