[AMRadio] B&W Dial Scale


Chuck Kembring kembring at epix.net
Sat Nov 6 22:10:21 EST 2004


Jim....
	I would love to have a copy! I'd like to get two sonce I have a friend with
one and it probably needs changed / cleaned-up as well....
Thanks,
73,
Chuck	WB3LGG


-----Original Message-----
From: amradio-bounces at mailman.qth.net
[mailto:amradio-bounces at mailman.qth.net]On Behalf Of Jim Wilhite
Sent: Friday, November 05, 2004 8:21 PM
To: Discussion of AM Radio
Subject: Re: [AMRadio] B&W Dial Scale


Hi Chuck:

I carefully removed mine and tried scanning and recreating it but ran into
problems with dirt and the yellow color.  I then decided to just run it
through a copy machine and it came out very clear.  I have a HP PSC 2410 and
could make the copy on photo paper.

Today I took the photo paper copy to a copy shop here and had him run it
through his copier with 110 lb. card stock.  It came out very nice and I
bought some Locktite super glue that as a brush and used that to attach it
to the plate of the VFO.

I can redo the copy and mail it to you if you would like.  The copy will be
on an 8 1/2 inch piece of stock and you would have to trim it to fit your
VFO.

I used a single edge razor blade to remove the old one and it came off in
one piece.  I drew the outline on the new one and got it pretty close.

Cost of the copy will be $1.00 plus a 9 X 11 envelop at 10 cents plus
postage which I estimate to be about 85 cents.  Let me know.

73  Jim
W5JO
----- Original Message -----
From: "Chuck Kembring" <kembring at epix.net>
To: "Discussion of AM Radio" <amradio at mailman.qth.net>
Sent: Friday, November 05, 2004 5:35 PM
Subject: RE: [AMRadio] B&W Dial Scale


> Jim....
> Mine is pretty shabby, I'd like to get one of your creations! Please give
> me the details and thanks.
> 73,
> Chuck Kembring WB3LGG
> 2901 Highpoint Road
> Cochranville, Pa. 19330-1818
>
>
> -----Original Message-----
> From: amradio-bounces at mailman.qth.net
> [mailto:amradio-bounces at mailman.qth.net]On Behalf Of Jim Wilhite
> Sent: Friday, November 05, 2004 12:32 PM
> To: AM Radio Discussion List; Boatanchors Mail List
> Subject: [AMRadio] B&W Dial Scale
>
>
> Some time back I posted to see if anyone had the Dial Scale for a B&W
> 5100B?
>
> No one had one, so I managed to get mine off and make a copy of it.  As I
> recall someone was looking for the same thing and because of a computer
> glitch, I lost the message.
>
> So if anyone needs a copy, let me know.  I will send them to you for the
> cost of copy and mail.  I had mine made on 110# card stock and it is
> pretty
> clean and white.  Now to just get it on the VFO without screwing up.
>
> 73  Jim
> W5JO
> ______________________________________________________________
> AMRadio mailing list
> Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
>
> ______________________________________________________________
> AMRadio mailing list
> Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
>


______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:AMRadio at mailman.qth.net




More information about the AMRadio mailing list

This page last updated 13 Dec 2017.