|[AMRadio] AM Amps|
hbrnut at earthlink.net
Thu Jan 13 18:35:26 EST 2005
Got to be CW, RTTY, etc. With AM you would either melt the tube down or
splatter all over the band.
At 04:49 PM 1/13/2005 -0500, you wrote:
>How do you reduce the drive for AM? I take it that is how you operate CW?
>James M. Walker wrote:
>>4-1000A G.G. amplifier, 3000 VDC plate, 700 MA Plate I, 500 MA
>>Grid I, with 125 Watts out of DX-100 running apprx 2100 W input and
>>dissipating 670 watts plate = approximately 1430 watts output!
>>While the carrier level into 50 ohm dummy load is 1400 watts measured
>>and a really NICE orange glow! This is with a 200 cfm blower, air system
>>socket and chimney.
More information about the AMRadio mailing list
This page last updated 23 Oct 2017.