|[AMRadio] FT102 and HDVL for 160|
w3slk at uplink.net
Sun Oct 9 20:14:26 EDT 2005
If you can determine what the TPI is and its diameter, you could just buy
regular coil stock and replace it. It should work fine since that was
probably how they did it.
----- Original Message -----
From: "Barrie Smith" <barrie at centric.net>
To: "Discussion of AM Radio" <amradio at mailman.qth.net>
Sent: Sunday, October 09, 2005 7:44 PM
Subject: Re: [AMRadio] FT102 and HDVL for 160
Somewhere around here I've got a 160 HDVL that I started to attempt to
repair years ago.
I gave up in frustration. Lots of turns on that thing.
And speaking of lots of turns: I've got a coil with no markings, that can
be read, that is exactly the same as an HDVL, excepting that the variable
coil is mounted on bearings inside the coil. Very similar to the BC-610
This thing is quite large in diameter, perhaps 25% larger than the HDVL, and
measures 60 milihenries end to end.
The swinging-link (or rotating in this case) coil is six turns of heavy
Anyone got any idea what this thing is?
73, Barrie, W7ALW
AMRadio mailing list
Post: mailto:AMRadio at mailman.qth.net
AMfone Website: http://www.amfone.net
AM List Admin: Brian Sherrod/w5ami
More information about the AMRadio mailing list
This page last updated 21 Oct 2017.