[AMRadio] BC-610 down=up


James M. Walker chejmw at acsu.buffalo.edu
Thu Oct 27 11:55:11 EDT 2005


Check the schematic for the BC-610

Jim
WB2FCN

----- Original Message -----
From: "Mike Sawyer" <w3slk at uplink.net>
To: "Discussion of AM Radio" <amradio at mailman.qth.net>
Sent: Wednesday, October 26, 2005 9:34 PM
Subject: Re: [AMRadio] BC-610 down=up


> The BC-610 has an un-balanced output. Generally, had it been 'push-pull',
it
> would have been with a balanced output. In essence, it only utilizes half
> the coil on the jack bar. I just had this very same conversation not too
> long ago.
> Mike(y)
> W3SLK
> ----- Original Message -----
> From: "Barrie Smith" <barrie at centric.net>
> To: "Discussion of AM Radio" <amradio at mailman.qth.net>
> Sent: Wednesday, October 26, 2005 8:47 PM
> Subject: Re: [AMRadio] BC-610 down=up
>
>
> Just curious, here.
>
> Someone mentioned that the BC-610 has a 50 ohm output.  Well, I don't
> remember ever having seen a BC-610, but I do have an HT4-B (the civilian
> version of the BC-610, made in 1938), which does not (in stock form, at
> least) have a 50 ohm output, it has a balanced output.
>
> So, I may be talking about, and giving advice about, something else.
>
> 73, Barrie, W7ALW
>
>
> ______________________________________________________________
> AMRadio mailing list
> Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> AMfone Website: http://www.amfone.net
> AM List Admin: Brian Sherrod/w5ami
>
> ______________________________________________________________
> AMRadio mailing list
> Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> AMfone Website: http://www.amfone.net
> AM List Admin: Brian Sherrod/w5ami
>
>
>





More information about the AMRadio mailing list

This page last updated 21 Oct 2017.