|[AMRadio] Drying out HV transformers / Chokes|
gkbrown at gwi.net
Mon Sep 19 16:53:42 EDT 2005
Speaking of HV trannys for the BC-610. I have one with a shorted secondary.
My plans are to rewind this hunk of iron and turn the primary into a dual
voltage, 115/230. This tranny is from the "E" model. Would I have anyone out
there that mite be interested? Also, the transformer has those big beautiful
----- Original Message -----
From: "Geoff" <w5omr at satx.rr.com>
To: "Discussion of AM Radio" <amradio at mailman.qth.net>
Sent: Sunday, September 18, 2005 11:12 PM
Subject: Re: [AMRadio] Drying out HV transformers / Chokes
> Barrie Smith wrote:
> > Are you sure you're talking about a BC-610 modulation transformer?
> > I just took the back off of my HT-4B, which is similar to the BC-610,
> > to take a look at the modulation transformer.
> > It looks like a "pick up with one hand" object to me.
> BC-610 Plate Transformer, is what they were talking about, and it's
> -not- a ['pick up with one hand'] critter.
> Neither, for that matter, is the '610 Mod xfrmr, but it -is- smaller
> than the plate xfrmr.
> 73 = Best Regards,
> AMRadio mailing list
> Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> AMfone Website: http://www.amfone.net
> AM List Admin: Brian Sherrod/w5ami
More information about the AMRadio mailing list
This page last updated 22 Oct 2017.