|[AMRadio] Triode connecting 803's for a Modulator|
Mike Dorworth, K4XM
k4xm at arczip.com
Sun Apr 9 16:08:14 EDT 2006
No, he had the screen and control grid strapped and fed. The supressor was
biased in the center tap of the driver transformer with the voltage
----- Original Message -----
From: "Donald Chester" <k4kyv at hotmail.com>
To: <amradio at mailman.qth.net>
Sent: Sunday, April 09, 2006 3:47 PM
Subject: Re: [AMRadio] Triode connecting 803's for a Modulator
> >From: "Mike Dorworth, K4XM" <k4xm at arczip.com>
> >On page 662 of the 15th Edition of RADIO HANDBOOK by Editor and
> >Paragraph 30-8 the use of 803 in triode connection is fully discussed. A
> >schematic (figure 20) shows 2500 volts at 18000 ohm plate to plate being
> >driven by a 8 watt speech amplifier through a Stancor A-4761 Class B
> >transformer set for 2:1 Ratio. Eg-g =170 volts
> >Driving power 7-8 watts
> >Resting current = 50 mA.
> >Power output = 510 watts
> >Supressor volts = 280-340 volts
> >A Chicago CMS-3 was used for the output transformer..
> I assume all three grids simply strapped together. Is that correct?
> In some circuits with triode-connected tetrodes, particularly the 807, the
> screen grids are driven directly with the audio, and a resistor is placed
> between the screen and control grids.
> Don k4kyv
> This message was typed using the DVORAK keyboard layout. Try it - you'll
> like it.
> AMRadio mailing list
> Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> AMfone Website: http://www.amfone.net
> AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb
More information about the AMRadio mailing list
This page last updated 22 Oct 2017.