[AMRadio] Modulator for DX60 available

Alan Beck abeck at xplornet.com
Fri Apr 14 09:58:57 EDT 2006

I am sorry, did we work out how it could be interfaces with a DX 60?

Normally there is a transformer in parallel with the output plate I 
think and modulation is applied to the other side to "squish" the RF at 
Audio frequencies.

Is this what you mean by output iron?

Best 73,


John Lyles wrote:
> I have a self contained, commercial looking modulator chassis that would work well with a DX60 sized rig. It uses a pair of 807s and has the input and output iron and driver tubes. It came from a SK's pile this summer. If there is interest, I would part with it to help out a DX60 conversion to high level plate modulation. Its a small thang. Technical details available upon request.
> 73
> John
> ______________________________________________________________
> AMRadio mailing list
> Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> AMfone Website: http://www.amfone.net
> AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb

More information about the AMRadio mailing list

This page last updated 20 Jan 2018.