[AMRadio] Hardware for potentiometer


TChesek at Epix.Net tchesek at epix.net
Fri Aug 18 15:25:55 EDT 2006


If you find a good source you could start a business...maybe call it "The
Nut Case"! hi

Tom K3TVC


----- Original Message ----- 
From: "John E. Coleman (ARS WA5BXO)" <wa5bxo2005 at pctechref.com>
To: <theo.bellamy at spirittelecom.com>; "'Discussion of AM Radio'"
<amradio at mailman.qth.net>
Sent: Friday, August 18, 2006 2:29 PM
Subject: [AMRadio] Hardware for potentiometer


> Ok so I found myself with out enough hardware.
>
> I have a 100K dual audio taper pot from Radio Shack and I lost the nut.
It
> is one for mounting in a 5/16 hole so I assume it is a 5/16 treaded sleeve
> with a 1/4 inch shaft but I can't find any hardware for it.
>
> Now I could just go buy another pot with hardware but after looking I find
> that I have other pots with no hardware and some of them are the same
> sleeve.  I have hardware for the bigger pots.  I guess you might say the
> standards.  Searching Google comes up with no hardware except for at
> Electronic Goldmine, where I bough a bunch that are to large.  Who makes
> this stuff, some far east company, and they secretly ship them to
> Switchcraft and other manufactures of potentiometers.
>
> John, WA5BXO
>
>
>
> ______________________________________________________________
> AMRadio mailing list
> Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> AMfone Website: http://www.amfone.net
> AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb
>





More information about the AMRadio mailing list

This page last updated 19 Oct 2017.