|[AMRadio] Vacuum or electronic relay|
ars.ka5mir at gmail.com
Fri Dec 1 12:14:35 EST 2006
Have you decided against a solid state relay? I'd like to try one of those
to see if it will solve a high current relay sticking problem I'm having.
Anyone on here used a SS relay in a high current position? Did it hold up?
On Friday 01 December 2006 10:59, A.R.S. - W5AMI wrote:
> I am using an old relay from a BC-610 to apply primary voltage
> (110vac) to a HV transformer in my rig. I would like to replace this
> with a vacuum relay or something similar. The contacts need to carry
> about 25 amps on each pole, one for the final supply, and one for the
> modulator plates on a separate HV transformer. Have any of you bc-610
> owners done this upgrade? If so, can you recommend a good relay for
> this? Prefer one with a 110 volt coil.
> Brian / w5ami
More information about the AMRadio mailing list
This page last updated 23 Oct 2017.