|[AMRadio] Breaker Info|
John E. Coleman (ARS WA5BXO)
wa5bxo2006 at pctechref.com
Mon Dec 4 11:59:02 EST 2006
Or maybe it the center connector is just a terminal post with no function in
From: amradio-bounces at mailman.qth.net
[mailto:amradio-bounces at mailman.qth.net] On Behalf Of Rick Brashear
Sent: Monday, December 04, 2006 10:51 AM
To: Discussion of AM Radio in the Amateur Service
Subject: Re: [AMRadio] Breaker Info
Maybe the center is for filament voltage only and when you go to the
bottom you have filament and B+...?
Jack Schmidling wrote:
> I need some help understanding the main power switch on my powersupply.
> I posted a pic to http://schmidling.com/breaker.jpg
> In the on position, the top and the bottom terminals are connected.
> This makes sense as this is one side of the AC line.
> I can not figure out what the center terminal is supposed to do.
> The only clue is the one of those black wires goes to a small
> transformer for the pilot light. The other lead goes to the bottom
> terminal. So center and bottom must be 110V but seems like it is on
> all the time.
> The device is a 15A Heinamann breaker but I can not read the part number.
> Any help?
AMRadio mailing list
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Partner Website: http://www.amfone.net
Post: mailto:AMRadio at mailman.qth.net
More information about the AMRadio mailing list
This page last updated 15 Dec 2017.