[AMRadio] Globe King questions


Dennis Pharr dpharr53 at swbell.net
Sun Feb 19 13:09:52 EST 2006


See link below - lots of great pics of WA5CMI's beautiful restoration:

http://home.att.net/~wa5cmi/gk500.htm


-----Original Message-----
From: amradio-bounces at mailman.qth.net
[mailto:amradio-bounces at mailman.qth.net] On Behalf Of Robert Nickels
Sent: Sunday, February 19, 2006 11:27 AM
To: amradio at mailman.qth.net
Subject: [AMRadio] Globe King questions

I'm restoring a Globe King 500B that was partially disassembled for use 
as a SSB linear.  I have the original 75K ohm 100 watt bleeder resistor 
but can't find a pair of holes that match up - can anyone tell me 
approximately where on the p/s chassis the bleeder was mounted?  (An 
under-chassis photo would be great).   I'd also like to know if the 866A 
sockets were on standoffs and the routing of the wire from center tap of 
the 2.5 volt filament tranny to the HV choke, if anyone has that kind of 
memory for detail (an under-chassis photo would be great!)

Thanks and 73,
Bob W9RAN
______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:AMRadio at mailman.qth.net
AMfone Website: http://www.amfone.net
AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb




More information about the AMRadio mailing list

This page last updated 22 Oct 2017.