Greg Schultz Sr
w5ry at cox.net
Sun Jan 8 22:09:15 EST 2006
Thanks to everyone on the list who responded with great ideas and
sources including the ebay seller KQ4BY. I will probably go that route
since I intend to use the middle section of the coil for the link, so I
will need a fairly large coil.
From: amradio-bounces at mailman.qth.net
[mailto:amradio-bounces at mailman.qth.net] On Behalf Of Brett gazdzinski
Sent: Sunday, January 08, 2006 5:49 PM
To: 'Discussion of AM Radio'
Subject: RE: [AMRadio] coils
If it does not need to be real small, one way to get a good coil
is to wind one out of copper tubing.
Home depot sells various types, small/thin, bigger and thicker...
I made the pi net tank coil for the pair of 4D32 rf deck out of copper
I soldered big wire terminal lugs (the crimp on type) on the ends of the
bolted it to large ceramic standoff insulators.
Here is a link to a picture:
My thanks to wa5bxo who still has my pictures up!
The wine bottle in the picture was used to wind the tubing on.
The home brew receivers are in the background...
AMRadio mailing list
Post: mailto:AMRadio at mailman.qth.net
AMfone Website: http://www.amfone.net
AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb
More information about the AMRadio mailing list
This page last updated 15 Dec 2017.