[AMRadio] coils


Edward B Richards zuu6k at juno.com
Sun Jan 8 23:18:08 EST 2006


Thanks, Jim.

73, Ed Richards K6UUZ
Simi Valley, Ca 93065
Home of the Air Force 1 pavilion

On Sun, 8 Jan 2006 20:02:19 -0600 "Jim Wilhite" <w5jo at brightok.net>
writes:
> Ed, have you considered the 1/8 inch copper tubing?  It is not 
> commonly 
> available but is easier to work with as you wind.
> If you are interested, go here: 
> http://www.plumbingworld.com/coppertubing.html
> 
> Buy by the foot..
> 
> 73  Jim
> W5JO
> 
> ----- Original Message ----- 
> From: "Edward B Richards" <zuu6k at juno.com>
> To: <amradio at mailman.qth.net>
> Sent: Sunday, January 08, 2006 7:45 PM
> Subject: Re: [AMRadio] coils
> 
> 
> > Hi Brett;
> >
> > I am going to wind a pi section tank coil from 1/4" copper tubing
> > tomorrow. Mine will be 4" in diameter and 3" in diameter. Which 
> tubing is
> > best (no kink) thick or thin? Thanks.
> >
> > 73, Ed Richards K6UUZ
> > Simi Valley, Ca 93065
> > Home of the Air Force 1 pavilion
> >
> 
> 
> ______________________________________________________________
> AMRadio mailing list
> Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> AMfone Website: http://www.amfone.net
> AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb
> 
> 



More information about the AMRadio mailing list

This page last updated 18 Dec 2017.