[AMRadio] Coleman Powermate "Cold Heat" Soldering iron review


Bob Peters rwpeters at swbell.net
Sun Jan 15 15:22:57 EST 2006


I have the Solder-It kit that the demoed at Dayton and other hamfests.
Best Iron I have ever owned for outside work...Little pricy but the guy
is a ham that owns the company

Bob W1PE

-----Original Message-----
From: amradio-bounces at mailman.qth.net
[mailto:amradio-bounces at mailman.qth.net] On Behalf Of Mike Sawyer
Sent: Sunday, January 15, 2006 1:22 PM
To: Discussion of AM Radio
Subject: Re: [AMRadio] Coleman Powermate "Cold Heat" Soldering iron
review

Don,
    I have a butane 'powered' Weller iron that is just the berries for
doing 
outside antenna work. You can take the tip off and it becomes a small
blow 
torch which has helped when working with copperweld lines. Usually those

gadgets on TV that you end up being saturated with commercials are
generally 
nothing more than snake oil.
Mike(y)
W3SLK
----- Original Message ----- 
From: "Donald Chester" <k4kyv at hotmail.com>
To: <amradio at mailman.qth.net>
Sent: Sunday, January 15, 2006 2:07 PM
Subject: RE: [AMRadio] Coleman Powermate "Cold Heat" Soldering iron
review


>From: "Jim candela" <jcandela at prodigy.net>

>Don't waste your money on this soldering iron...


I recall seeing a soldering iron demo at Datyon one year,  that used
liquid
fuel, something like lighter fluid, that contained a miniature blowtorch
that heated a real honest-to-God copper soldering tip.  It took it only
a
few seconds warm up, and worked just like an electric soldering iron. It
was
about the same size as 150-watt electric job.  That's what I thought of
first upon hearing about a "Coleman soldering iron."

I have actually tried to solder using the same technique as the one
described earlier, when the tip on my Weller soldering gun would break
it
two.  I had almost identical results.  Ended up making an emergency
replacement tip out of a piece of #10 or #12 bare copper wire.

_______________________________________________________________

This message was typed using the DVORAK keyboard layout.  Try it -
you'll
like it.
http://www.mwbrooks.com/dvorak/
http://gigliwood.com/abcd/


______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:AMRadio at mailman.qth.net
AMfone Website: http://www.amfone.net
AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb 

______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:AMRadio at mailman.qth.net
AMfone Website: http://www.amfone.net
AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb




More information about the AMRadio mailing list

This page last updated 18 Oct 2017.