|[AMRadio] AM Transmitter Advice??|
ronnie.hull at glowbugs.com
Mon Jan 30 15:10:53 EST 2006
for years I used a pair of 813's in grounded grid and drove them with a
ranger. It produced great sounding audio. I still have that as my backup to my
813's are great tubes. The only drawback for me is I like to operate on ten
meters and 813's are shakey at best, up there.
good luck on your project, Iknow you will enjoy it.
ronnie - W5SUM
---------- Original Message -----------
From: Larry Keith <kq4by at rocketmail.com>
To: Discussion of AM Radio <amradio at mailman.qth.net>
Sent: Mon, 30 Jan 2006 12:06:43 -0800 (PST)
Subject: [AMRadio] AM Transmitter Advice??
> Well, Let's see if we can change the subject.. 8-)
> I am gathering ideas for a homebrew AM transmitter..
> My friend, KR1S (Jim Kearman) is designing an AM
> transceiver, for me. We plan for this to be a
> solid-state unit that will deliver about 100 watts
> out. It will be single band (75 meters) and I have
> been considering using that to feed a homebrew linear.
> I have the makings of a 2 x 813 amp thanks to my and
> Jim's hamfesting efforts.
> So far, we have been reading and kicking around ideas.
> It seems that with the derating of the amp to handle
> the continuous carrier, etc.. may be more trouble than
> it is worth.
> So, I would be interested in opinions as to the
> relative merits of using a linear vs high-level
> modulation. And, pointers to existing circuits would
> be helpful..
> Any ideas?
> Larry Keith
> 231 Shenandoah Trail
> Warner Robins, GA 31088-6289
> kq4by at rocketmail.com
> 478-329-0030 (home)
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> AMRadio mailing list
> Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> AMfone Website: http://www.amfone.net
> AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb
------- End of Original Message -------
More information about the AMRadio mailing list
This page last updated 20 Oct 2017.