|[AMRadio] Lever (Leaf Type) switches|
Merz Donald S
merz.ds at mellon.com
Wed Jul 19 10:53:42 EDT 2006
Those must be whoppers. I thought these were large. But the ones I have are smaller and rated at 3A at 110V--also made by Mossman. The mounting dimensions are smaller--7/8 x 5/8.
So I'm afraid that I am no help with these.
73, Don M.
From: amradio-bounces at mailman.qth.net on behalf of Rick Brashear
Sent: Sat 7/15/2006 11:32 PM
To: AMRadio at mailman.qth.net
Subject: [AMRadio] Lever (Leaf Type) switches
Does anyone happen to have a few lever switches they would like to
sell? These are an older type used in the BTA-1R2. The diminsions are
about 1 1/8" X 1 3/8" X 4" long. The leaf configurations are not
critical as they can be modified to fit my needs. However, they do need
to all be momentary contact up and down with center rest. The ones I am
looking for are mounted by 4 small screws about 1 1/8" X 7/8" apart. I
have two that will work and if I can find two more of the same design
I'm in business. But, if I can't find any to match the ones I have I'll
need four in all. I've tried Surplus Sales of Nebraska and Fair Radio.
Both have similar switches, but are not large enough. The contacts need
to be rated at 10 amps/110 volts. I can send a picture if needed. The
manufacturer and part number are: MOSSMAN RCA 4203-26P4.
Thanks for any help.
AMRadio mailing list
Post: mailto:AMRadio at mailman.qth.net
AMfone Website: http://www.amfone.net
AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb
The information contained in this e-mail may be confidential and is intended solely for the use of the named addressee.
Access, copying or re-use of the e-mail or any information contained therein by any other person is not authorized.
If you are not the intended recipient please notify us immediately by returning the e-mail to the originator.(17b)
More information about the AMRadio mailing list
This page last updated 18 Feb 2018.