|[AMRadio] Stuff for sale...|
w3slk at uplink.net
Sun Jun 25 19:37:27 EDT 2006
Do you have any spare mod transformers in that variety? That's the same
one that went bad in my RCA ET-4336F and I have been trying to find one for
----- Original Message -----
From: "Brett gazdzinski" <brett.gazdzinski at verizonbusiness.com>
To: "'Discussion of AM Radio'" <amradio at mailman.qth.net>
Sent: Sunday, June 25, 2006 7:03 PM
Subject: RE: [AMRadio] Stuff for sale...
Pictures 53 to 57 show the rig in more detail.
I have coils for 80 and 40 meters, the rig is silent,
no fans or variac hum, the power supply is selectable
on the front panel between 1200, 1300, or 1500 volts roughly.
The rig needs about 20 watts of RF drive, and about 15 watts
of audio drive (8 ohms), to give around 300 watts carrier out.
All the parts are at the kilowatt level, nothing gets
warm or will crap out even if you left it keyed up for a year.
Step start is built in, along with push to talk, and negative
Everything is metered and adjustable.
The mod transformer is an old RCA that seems to sound
VERY good, 10,400 ohms to 4350 ohms.
The power transformer matches the mod transformer, RCA...
The power supply diodes are 14kv at 1 amp each, and there are
4 of them in half wave center tapped setup.
Final tubes can be 811, 812, 572b.
> -----Original Message-----
> From: amradio-bounces at mailman.qth.net
> [mailto:amradio-bounces at mailman.qth.net] On Behalf Of Bob Maser
> Sent: Sunday, June 25, 2006 11:30 AM
> To: Discussion of AM Radio
> Subject: Re: [AMRadio] Stuff for sale...
> Hi Brett, I am interested in you 812 transmitter. Can you
> send more pics of
> Bob Maser
> Valrico, FL
> ----- Original Message -----
> From: "Brett gazdzinski" <brett.gazdzinski at verizonbusiness.com>
> To: "'Discussion of AM Radio'" <amradio at mailman.qth.net>
> Sent: Saturday, June 24, 2006 8:16 PM
> Subject: RE: [AMRadio] Stuff for sale...
> > I am trying to clear out the shack a bit, and
> > have some stuff for sale:
> > Icom 756 pro, with power supply, $1500.00, general coverage
> transmit mod
> > done.
> > Homebrew 812a rig modulated by 811a's, in rack cabinet $2000.00 ?
> > http://wa5bxo.shacknet.nu/N2DTS/Picture%20005.jpg
> > Textronics 2465 4 trace 300 MHz O scope, $500.00
> > Gonset G76 with ac supply, manual, $150.00
> > Galaxy DX99v, 15 watt am cb/10 meter mobil, does AM, ssb, fm,
> > has freq readout along with channel numbers, and other CB
> stuff, $200.00.
> > CVM5 mod transformer, $150.00
> > 50 Henry 400 ma reactor (Peter Dahl) $75.00
> > Samson 60 watt per channel audio amp, rack mount, about 1 inch high,
> > great to drive modulator grids in a small space, $100.00.
> > Email me for more info at brett.gazdzinski at verizonbusiness.com
> > I can take digital pictures of anything anyone is interested in...
> > Brett
> > N2DTS
> > ______________________________________________________________
> > AMRadio mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/amradio
> > Help: http://mailman.qth.net/mmfaq.html
> > Post: mailto:AMRadio at mailman.qth.net
> > AMfone Website: http://www.amfone.net
> > AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb
> AMRadio mailing list
> Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> AMfone Website: http://www.amfone.net
> AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb
AMRadio mailing list
Post: mailto:AMRadio at mailman.qth.net
AMfone Website: http://www.amfone.net
AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb
More information about the AMRadio mailing list
This page last updated 19 Oct 2017.