|[AMRadio] 811A settings for TV-2C|
w3slk at uplink.net
Sat Mar 4 11:08:06 EST 2006
I checked my TV-2C and I don't have them either. If memory serves me,
there was an adapter that was plugged into the unit for the express testing
of large transmitting tubes. The TV-2C cannot accomodate tubes like the 805
or others '4-pin giants' without an appropriate test jig. I don't have a
clue as to why the 811 is missing from the test data.
----- Original Message -----
From: "Dan Osborne" <wb5afy at wb5afy.net>
To: "Discussion of AM Radio" <amradio at mailman.qth.net>
Sent: Friday, March 03, 2006 8:22 PM
Subject: [AMRadio] 811A settings for TV-2C
Well - was ready to test all my spare 811A's this evening but
when I dug out the TV-2C tube tester the roll chart does NOT
have an entry for 811...sigh..
Anyone out there have the correct settings for the 811 on the
TV-2C ??? And if I am begging maybe the settings for 812 as
well - (one can hope !!!)
The chart has setting for 805, 829, 832 et al...but no 811..812..
tnx for the help...oz
Dan L Osborne WB5AFY
wb5afy at wb5afy.net
AMRadio mailing list
Post: mailto:AMRadio at mailman.qth.net
AMfone Website: http://www.amfone.net
AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb
More information about the AMRadio mailing list
This page last updated 19 Oct 2017.