[AMRadio] watt meter

Brett gazdzinski brett.gazdzinski at verizonbusiness.com
Tue Mar 7 10:17:29 EST 2006

I think that is the tuner I have.
The watt meters are not pep though.

The tuner works great, the balun is not good for any power
if things are wacko with the swr...

I bought it new from heathkit in Philadelphia a LONG time ago!



> -----Original Message-----
> From: amradio-bounces at mailman.qth.net 
> [mailto:amradio-bounces at mailman.qth.net] On Behalf Of W5OMR/Geoff
> Sent: Tuesday, March 07, 2006 10:12 AM
> To: Discussion of AM Radio
> Subject: Re: [AMRadio] watt meter
> Brett gazdzinski wrote:
> > 
> >I got an Autek meter off ebay, see the link below...
> >
> I just bought a Heathkit SA-2060A tuner, with meters built in, at a 
> recent hamfest.
> I currently use a Heathkit SA-2060 tuner, on my 75m full-wave 
> loop, fed 
> with 450-ohm ladder line.
> Tomorrow morning, I connect the new tuner up and see if it works at 
> least as good as the current tuner (which is a mis-nomer... they're 
> actually called "impedance matching devices".  An Antenna 
> tuner is the 
> guy who goes out and physically shortens or lenthens the antenna to 
> resonance... IMO, of course.  YMMV.)
> --
> 73 = Best Regards,
> -Geoff/W5OMR
> ______________________________________________________________
> AMRadio mailing list
> Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> AMfone Website: http://www.amfone.net
> AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb

More information about the AMRadio mailing list

This page last updated 18 Dec 2017.