[AMRadio] Modulator feedback


Mike Sawyer w3slk at uplink.net
Fri Mar 17 17:22:30 EST 2006


Rick,
    The UTC may work so don't discount it. Those I and H model transformers 
were only about half the size as the D and E models. I can't think of the 
company that made them but they were substantially different then the 
earlier models. As always, your mileage may vary.
Mod-U-Lator,
Mike(y)
W3SLK
----- Original Message ----- 
From: "Rick Brashear" <rickbras at airmail.net>
To: "Discussion of AM Radio" <amradio at mailman.qth.net>
Sent: Friday, March 17, 2006 4:25 PM
Subject: Re: [AMRadio] Modulator feedback


Wow!  Not exactly the news I wanted, Mike, but thanks for the honesty.
It looks like I may have to move the speech amp and mic considerably
further away from the "E" model.  I have an "H" and "I" model, but they
are still in the refurb process.  Potted  modulation transformers or any
modulation transformer for the 610 series is scarce.  I have a UTC that
will work, but it's not potted and I have an oil filled military
transformer that would work if I had room on the chassis.  I wonder what
the guys in the SCR-399 did to contend with this issue since they were
in such close quarters?  Anyway, back to the drawing board and thanks
again for the info.

73,
Rick/K5IZ


Mike Sawyer wrote:

>Rick,
>    Unfortunately, you are plagued with the same problem dozens of -610
>owners have. The only way to resolve it is to get an I or H model 
>modulation
>transformer. They are potted and hermetically sealed and don't talk back
>near as much. Other than that you are SOL.
>Mod-U-Lator,
>Mike(y)
>W3SLK
>----- Original Message ----- 
>From: "Rick Brashear" <rickbras at airmail.net>
>To: "Discussion of AM Radio" <amradio at mailman.qth.net>
>Sent: Thursday, March 16, 2006 10:42 PM
>Subject: [AMRadio] Modulator feedback
>
>
>I've posed a couple of questions on some other lists and received some
>good advice, but I am still in need of more.  My BC-610-E has a bad
>feedback or "talk back" problem.  I've placed a capacitor across the
>overload relay (RY-5) and that did eliminate a little of the talk back.
>However, with much audio gain at all, not nearly enough to attain 100%
>modulation, I get feedback.  Not just talk back, but feedback.  I have
>to assume it's coming from the modulation transformer.  The modulator
>bias is set for 40 ma as specifications state.  The bolts on the
>modulation transformer are all tight.  What am I over looking here?  I'm
>using a BC-614-E speech amplifier with a D-104 non amplified mic.  I did
>a few modifications to the dynamic input circuitry of the BC-614 to
>better match the D-104, but that is the only modification in either the
>speech amp or the BC-610-E.
>
>Rick/K5IZ
>
>
>______________________________________________________________
>AMRadio mailing list
>Home: http://mailman.qth.net/mailman/listinfo/amradio
>Help: http://mailman.qth.net/mmfaq.html
>Post: mailto:AMRadio at mailman.qth.net
>AMfone Website: http://www.amfone.net
>AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb
>
>______________________________________________________________
>AMRadio mailing list
>Home: http://mailman.qth.net/mailman/listinfo/amradio
>Help: http://mailman.qth.net/mmfaq.html
>Post: mailto:AMRadio at mailman.qth.net
>AMfone Website: http://www.amfone.net
>AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb
>
>
>


______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:AMRadio at mailman.qth.net
AMfone Website: http://www.amfone.net
AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb 




More information about the AMRadio mailing list

This page last updated 12 Dec 2017.