|[AMRadio] Use of an oscilloscope to monitor am audio|
Jim Miller WB5OXQ
wb5oxq at grandecom.net
Sat Mar 18 19:42:23 EST 2006
I just checked the specs on my scope and it says it is a dual channel dual
trace with X-Y capability frequency range DC to 60 Mhz.
----- Original Message -----
From: "Jim Wilhite" <w5jo at brightok.net>
To: "Discussion of AM Radio" <amradio at mailman.qth.net>
Sent: Saturday, March 18, 2006 3:25 PM
Subject: Re: [AMRadio] Use of an oscilloscope to monitor am audio
> Jim I have a Tek 465M that I use. I also have a tuner with a built in
> balun that I do not use. I use the tuner with coax when operating off
> the resonance of my antenna. My scope and probes are good to 100 Mc and
> provide enough bandwidth to monitor up to 29 Mc. If your 453's bandwidth
> is less, you won't be able to go as high.
More information about the AMRadio mailing list
This page last updated 21 Oct 2017.