|[AMRadio] Ferroresonant transformer revisited|
w5omr at satx.rr.com
Wed May 10 14:17:16 EDT 2006
> W5OMR/Geoff wrote:
>> Other than testing the filaments, no - I don't know of a way other
>> than comparing it in an amp designed to use 'em.
>> Speaking of which, Rick... I've got an amp that someone started to
>> home-brew, designed around a 450T. Filament is 220v primary, at 7.5v
>> big peice of copper tubing for a coil, tapped for 80, 40, 20 and 10m.
>> And, I have a brighly glowing 450TL to go along with it.
>> If you're interested, I'll send some pictures of it.
> I don't know if I can afford it, but I'd like to see some pictures.
> How far along is it and which parts are still needed? I'm assuming
> there is no HV supply, so what would it require about 2500 volts at
> half an amp?
Except for the B+ supply, everything is there.
The 450TH/L, according the spec sheet, will take up to 6kVDC on the
plate. You'll likely need a bit more current...
450TH spec-sheet --> http://tinyurl.com/p5f85
73 = Best Regards,
More information about the AMRadio mailing list
This page last updated 18 Oct 2017.