[AMRadio] Seeking advice on testing modulation transformers

Jim Candela jcandela at prodigy.net
Thu Sep 21 19:23:21 EDT 2006

----- Original Message ----
From: John E. Coleman (ARS WA5BXO) <wa5bxo2006 at pctechref.com>
To: Discussion of AM Radio in the Amateur Service <amradio at mailman.qth.net>
Sent: Thursday, September 21, 2006 9:44:10 AM
Subject: RE: [AMRadio] Seeking advice on testing modulation transformers

Yep, here in south Texas it gets hot. So since we got indoor plumbing now,
we cleaned up the old outhouse and made sure it was dry, the old platform
makes a good place to set the big on while it bakes.

Just had to say it!!
John, WA5BXO 

Reply from Jim, WD5JKO:

John, isn't that the way to insure that your modulation sounds 'crappy'? :0)

More information about the AMRadio mailing list

This page last updated 20 Feb 2018.