[AMRadio] Squeaky roller inductor


SBJohnston at aol.com SBJohnston at aol.com
Sat Feb 3 12:09:11 EST 2007


I generally lube the axles of the roller with regular non-gumming oil, and 
thoroughly clean the roller shaft with lighter fluid and rags.  Then I'd use 
Caig Deoxit on the points of electrical contact such the bearing point between 
roller and shaft, and end sliding contacts of coil (but not the outside of 
roller or the coil itself).

Steve WD8DAS



More information about the AMRadio mailing list

This page last updated 23 Oct 2017.