|[AMRadio] Transformers Revised|
gkbrown at gwi.net
Mon Feb 19 06:02:54 EST 2007
Kinda scratching my head here, if the primary voltage is passing thru a
rheostat, why the need for 100 volt primary trannys?
----- Original Message -----
From: "ARS W5OMR" <ars.w5omr at gmail.com>
To: "Discussion of AM Radio in the Amateur Service"
<amradio at mailman.qth.net>
Sent: Monday, February 19, 2007 12:51 AM
Subject: Re: [AMRadio] Transformers Revised
> On 2/18/07, Rick Brashear <rickbras at airmail.net> wrote:
> > I just made a discovery. The BT-20-A broadcast transmitter uses several
> > filament transformers for the various stages. All of them are rated at
> > 100 volts AC primary. All of the primaries pass through a voltage
> > adjusting rheostat and volt meter to insure proper filament voltage on
> > all tubes. So, my earlier request for a 115 vac primary filament
> > transformer was wrong. It needs to have a 100 vac primary.
> I've seen a lot of filament transformers that had 0 - 100 - 105 - 110
> taps on the primary, with one secondary. They're out there, Rick.
> What voltages do you need? I might have one.
> Operating your AM rig without a scope
> is like driving our car at night without headlights.(~K4KYV)
> 73 = Best Regards
> AMRadio mailing list
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Partner Website: http://www.amfone.net
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.412 / Virus Database: 268.18.2/692 - Release Date: 2/18/2007
More information about the AMRadio mailing list
This page last updated 18 Dec 2017.