Jim Miller WB5OXQ
wb5oxq at grandecom.net
Sun Jan 14 23:25:46 EST 2007
Just a thought; are you going to run the radio mobile? If not there is a
way to use a 12 volt transformer to power the radio and somehow jumper the
vibrator and run straight ac into the radio. I believe the filter may need
to be larger though if you do that. I have seen it done on old tube type
----- Original Message -----
From: "Jim Miller WB5OXQ" <wb5oxq at grandecom.net>
To: "Discussion of AM Radio in the Amateur Service"
<amradio at mailman.qth.net>
Sent: Sunday, January 14, 2007 9:19 PM
Subject: Re: [AMRadio] Vibrators
> There are solid state replacements for vibrators. Try antique radio
> ----- Original Message -----
> From: "Bob Peters" <rwpeters at swbell.net>
> To: "AM" <amradio at mailman.qth.net>; "Boatanchors"
> <boatanchors at listserv.tempe.gov>
> Sent: Sunday, January 14, 2007 8:20 PM
> Subject: [AMRadio] Vibrators
>> Hay guys I just picked up a vibrator P/S for a Pierson twins radio...
>> Can the Vibrator be changed
>> Out to something solid state??? Or am I going to have to find a 12V
>> Vibrator??? Probably a stupid question but ohhh well fire away...
>> Very Best 73's
>> Bob W1PE
>> The Voice of Mesquite
>> AMRadio mailing list
>> List Home: http://mailman.qth.net/mailman/listinfo/amradio
>> Partner Website: http://www.amfone.net
>> Help: http://mailman.qth.net/mmfaq.html
>> Post: mailto:AMRadio at mailman.qth.net
> AMRadio mailing list
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Partner Website: http://www.amfone.net
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
More information about the AMRadio mailing list
This page last updated 18 Oct 2017.