[AMRadio] HB Transmitter Schematic

Tom Elmore tom at telmore.com
Sun Jun 3 14:42:14 EDT 2007

John, it is connected on a large ceramic jack bar directly to the tube
plate. I was looking for a schematic to reference so I could determine the
values. The unit in question appears in ER#57 page #16 at the top.

Thank You
Thomas Elmore
Anchorage, Alaska

-----Original Message-----
From: amradio-bounces at mailman.qth.net
[mailto:amradio-bounces at mailman.qth.net]On Behalf Of John E. Coleman
Sent: Sunday, June 03, 2007 10:09 AM
To: 'Discussion of AM Radio in the Amateur Service'
Subject: RE: [AMRadio] HB Transmitter Schematic

	Does this rig use a plug in coil assembly on a large ceramic jack
bar?  And is the coil connected to the plate of the tube or is it connected
through a coupling capacitor to the plate.

There or only a few ways to wire an output link coupled rig with a single
tube (not Push pull).

Are you looking for a wiring diagram or parts descriptions and values?

John, WA5BXO

-----Original Message-----
From: amradio-bounces at mailman.qth.net
[mailto:amradio-bounces at mailman.qth.net] On Behalf Of Tom Elmore
Sent: Sunday, June 03, 2007 5:22 AM
To: amradio at mailman.qth.net
Subject: [AMRadio] HB Transmitter Schematic

Hello, I recently inherited a HB transmitter from my good friend Bob KL7HDY
who became a SK two months ago. Bob built this transmitter back in the late
1950's in a 6 foot rack enclosure. I am trying to determine if he built this
based upon any popular designs of the day since I do not have a schematic
for it. This is what I know so far:

The final amplifier tube is a single 304TH
It uses link output and is currently set for 15 meters. These output coils
are quite beefy by the way as I believe they were rated for a full KW input.
The modulator uses a pair of 810's.
Bob, had it set up to be driven from a Heathkit TX-1 as the exciter.

Thank You
Tom Elmore KA1NVZ
Anchorage, Alaska

AMRadio mailing list
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Partner Website: http://www.amfone.net
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:AMRadio at mailman.qth.net
To unsubscribe, send an email to amradio-request at mailman.qth.net with
the word unsubscribe in the message body.

More information about the AMRadio mailing list

This page last updated 19 Jan 2018.