[AMRadio] Gates BC-1T

SBJohnston at aol.com SBJohnston at aol.com
Mon May 7 22:55:16 EDT 2007

ars.w5ami at gmail.com writes:

> The Flex can output as little as 100mw, however I'm not
> sure how stable the output is at that level...

You could put the output of the Flex into a tee-connector with a dummy load 
on one port and the other into the BC-1T.  That should improve the chances your 
rig sees a reasonable load - and you have excess output energy available so 
the loss should not be a problem

Steve WD8DAS

 See what's free at 

More information about the AMRadio mailing list

This page last updated 19 Feb 2018.