|[AMRadio] B&W 850-A vs 852 Pi-Network assembly|
wa9vrh at mtco.com
Mon May 28 21:01:16 EDT 2007
I will keep looking for an 850-A as it would be the best way to go. Thanks
for the info and I would appreciate a copy of the chart.
Address and email is good on QRZ.
----- Original Message -----
From: <Ka9p at aol.com>
To: <amradio at mailman.qth.net>
Sent: Monday, May 28, 2007 8:00 PM
Subject: Re: [AMRadio] B&W 850-A vs 852 Pi-Network assembly
> Larry -
> The 850A and 852 have the same voltage rating but the plate impedance for
> the 850A is 2500 to 5000 ohms, while the 852 is 1500 to 3000 ohms.
> In other words the inductance of the 850A is 13.6,6.5,1.75, 1 and 0.8
> microhenries, and the 852 is 7, 3.72, 2.34, 1.34, and 0.95 microhenries.
> I have a chart that shows capacity to resonate on each band, etc. from an
> old B&W catalogue if it would help. It's sure not a drop in, but I expect
> could make it work ok except perhaps on 80 with a bit of juggling.
> Good luck, Scott
> ************************************** See what's free at
> AMRadio mailing list
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Partner Website: http://www.amfone.net
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
More information about the AMRadio mailing list
This page last updated 17 Dec 2017.