[AMRadio] FS: Vector Tube Socket Test Adapters, Current and Voltage


Don Merz n3rht at yahoo.com
Sun Oct 21 12:14:32 EDT 2007


For Sale
 
Test Socket Adapters. The idea with these was to plug the adapter into the tube socket, then plug the tube into the adapter. The adapter gave you test points above the chassis for making measurements without removing the radio from the chassis. Very handy.
 
Vector T789C Current Probe Test Socket Adapter Set. This set is NOS in the original plastic box with documentation. It includes 3 adapters--Octal, 9-pin and 7-pin. The current probe and plate cap adapter are also included. These current probe adapters are less common than the voltage type normally seen. You can use them to measure voltage at the test points just like with the normal adapters. But if you look closely at the test point, it is actually a contact set that breaks the circuit when the included current probe is inserted between the contact tabs. You connect the ends of the current probe to your VOM or VTVM and voila, you can now measure current at any tube pin from above the chassis, without disconnecting any wires--a huge time saver where current measurements are important for problem solving, bias adjustments, etc. I also have the Vector current adapters for 9-pin and 12-pin compactrons in like-new condition which I will include. So this is a
 very complete current adapter set, as new. $80 plus $10 US priority flat rate box mailing with tracking.
 
Vector T80C Octal Current adapter, like new. $34 including padded envelope mailing.
 
Vector T-7M 7-pin miniature voltage adapter, used but good. $14 including padded envelope mailing.
 
CBS/Hytron voltage test adapter set including octal, 7-pin and 9-pin miniature adapters. Used, in good shape. $34 including padded envelope mailing.
 
Thanks for looking.
73, Don Merz, N3RHT


More information about the AMRadio mailing list

This page last updated 19 Oct 2017.