|[AMRadio] Transmitting Mica F2 -vs- G2 types|
A.R.S. - WA5AM
ars.w5ami at gmail.com
Thu Sep 13 13:48:53 EDT 2007
Sorry, I meant the two I have now are both 3000pF. Yeah, that would
have worked out great Barrie. I do plan to use the two 3000pF's in
series for 160m however...
On 9/13/07, Barrie Smith <barrie at centric.net> wrote:
> Why not put the two you have in there now in series?
> That would equal 750 pf, with plenty of voltage and current capability.
> 73, Barrie, W7ALW
> ----- Original Message -----
> From: "A.R.S. - WA5AM" <ars.w5ami at gmail.com>
> To: "Discussion of AM Radio in the Amateur Service"
> <amradio at mailman.qth.net>
> Sent: Thursday, September 13, 2007 11:01 AM
> Subject: [AMRadio] Transmitting Mica F2 -vs- G2 types
> > I am getting ready to convert my Gates BC-1T to 75 and 160 and need
> > some opinions on the loading cap. The 1T uses fixed capacitance and a
> > variable inductor for loading. I need about 750 pF for the loading
> > cap on 75 meters. The original loading caps (two in parallel) are G2
> > micas at 8000 vdc, however they are both 1500 pF. I have a type F2B
> > that is 800 pF at 6000 vdc, that would be close enough, but I'm afraid
> > it may not handle the current. The F2 is a much smaller unit than the
> > G2's that are in there now. Anyone have any opinions on what the F2
> > can handle? Being on a higher freq. than original design I think the
> > 6KV rating might be okay, but I'm still concerned with the current
> > rating of the F2 as opposed to the type G2.
> > Nebraska Surplus has what I'm looking for, but they want $175 for it.
> > Thanks,
> > Brian / wa5am
> > --
> > "Money is only temporary, but radios are forever" - Jim Little aka
> > "the old dog"/K5BAI
> > ______________________________________________________________
> > Our Main Website: http://www.amfone.net
> > AMRadio mailing list
> > List Rules (must read!): http://w5ami.net/amradiofaq.html
> > List Home: http://mailman.qth.net/mailman/listinfo/amradio
> > Help: http://mailman.qth.net/mmfaq.html
> > Post: mailto:AMRadio at mailman.qth.net
> > To unsubscribe, send an email to amradio-request at mailman.qth.net with
> > the word unsubscribe in the message body.
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
"Money is only temporary, but radios are forever" - Jim Little aka
"the old dog"/K5BAI
More information about the AMRadio mailing list
This page last updated 20 Oct 2017.