[AMRadio] Building my first regenerative RX


jeremy-ca km1h at jeremy.mv.com
Fri Feb 1 22:08:13 EST 2008


Not according to these people.

http://www.eham.net/reviews/detail/1982?ehamsid=87e8ea3a2fab3b8ef3e03a997b2297af

I got screwed twice, thats my limit.

Carl
KM1H


----- Original Message ----- 
From: "Bob Macklin" <macklinbob at msn.com>
To: "Discussion of AM Radio in the Amateur Service" 
<amradio at mailman.qth.net>
Sent: Friday, February 01, 2008 9:58 PM
Subject: Re: [AMRadio] Building my first regenerative RX


>I have been buying from OSE for about 5 years. No order tool longer than a
> week to ship. SSofN is about the same.
>
> Bob Macklin
> K5MYJ
> Seattle, Wa,
> "Real Radios Glow in the Dark"
> ----- Original Message -----
> From: "jeremy-ca" <km1h at jeremy.mv.com>
> To: "Discussion of AM Radio in the Amateur Service"
> <amradio at mailman.qth.net>; "Brett Gazdzinski" 
> <brett.gazdzinski at verizon.net>
> Sent: Friday, February 01, 2008 6:52 PM
> Subject: Re: [AMRadio] Building my first regenerative RX
>
>
>> Do they still take several months to ship an order?
>>
>> Carl
>> KM1H
>>
>>
>> ----- Original Message -----
>> From: "Bob Macklin" <macklinbob at msn.com>
>> To: "Brett Gazdzinski" <brett.gazdzinski at verizon.net>; "Discussion of AM
>> Radio in the Amateur Service" <amradio at mailman.qth.net>
>> Sent: Friday, February 01, 2008 9:31 PM
>> Subject: Re: [AMRadio] Building my first regenerative RX
>>
>>
>> > Ocean State Electronics has bakelite 4 and 5 pin coil forms and the
>> > sockets.
>> >
>> > Bob Macklin
>> > K5MYJ
>> > Seattle, Wa,
>> > "Real Radios Glow in the Dark"
>> > ----- Original Message -----
>> > From: "Brett Gazdzinski" <brett.gazdzinski at verizon.net>
>> > To: "Discussion of AM Radio in the Amateur Service"
>> > <amradio at mailman.qth.net>
>> > Sent: Friday, February 01, 2008 6:23 PM
>> > Subject: Re: [AMRadio] Building my first regenerative RX
>> >
>> >
>> >> You can buy tube bases, so you dont have to break tubes.
>> >> Antique electronic supply was selling them last I looked,
>> >> along with coil forms, rf chokes, tubes, sockets, knobs,
>> >> and so on.
>> >>
>> >> PVC pipe makes nice coil forms, but to get the best Q, the old B+W
>> >> coil stock can not be beat.
>> >>
>> >> Brett
>> >> N2DTS
>> >>
>> >> ----- Original Message -----
>> >> From: "AirRadio" <AirRadio at dsl.pipex.com>
>> >> To: "Discussion of AM Radio in the Amateur Service"
>> >> <amradio at mailman.qth.net>
>> >> Sent: Friday, February 01, 2008 3:55 PM
>> >> Subject: Re: [AMRadio] Building my first regenerative RX
>> >>
>> >>
>> >> >
>> >> > That looks really great, I have almost enough bits in my junkbox to
>> >> > construct this ( might even have a Selenium rectifier!  hihi)  I 
>> >> > love
>> > the
>> >> > sound of breaking glass, now where's all those old dead octals gone?
>> >> > Seriously though you don't have to use old tube bases but you might
>> >> > have
>> >> to
>> >> > recalculate the coil dimensions, I wonder if there is a simple
>> > transmitter
>> >> > to go with it? 73 Max M0GHQ
>> >> > >
>> >> > >
>> >> > > JT Croteau wrote:
>> >> > >> I'd like to try building my first regenerative receiver but I am
>> > quite
>> >> > >> new to tube rigs so I am looking for something relatively simple
> to
>> >> > >> construct.  I've been looking at the following circuit and wonder
> if
>> >> > >> it'd be a good one to start with.
>> >> > >>
>> >> > >> http://www.mines.uidaho.edu/~glowbugs/12at7_regen.html
>> >> > >>
>> >> > >> Would I have any difficulties finding the tube, tube socket, and
>> >> > >> tube
>> >> > >> bases?
>> >> > >>
>> >> > >> Thanks
>> >> > >>
>> >> >
>> >> >
>> >> > ______________________________________________________________
>> >> > Our Main Website: http://www.amfone.net
>> >> > AMRadio mailing list
>> >> > List Rules (must read!): http://w5ami.net/amradiofaq.html
>> >> > List Home: http://mailman.qth.net/mailman/listinfo/amradio
>> >> > Help: http://mailman.qth.net/mmfaq.html
>> >> > Post: mailto:AMRadio at mailman.qth.net
>> >> > To unsubscribe, send an email to amradio-request at mailman.qth.net 
>> >> > with
>> >> > the word unsubscribe in the message body.
>> >>
>> >> ______________________________________________________________
>> >> Our Main Website: http://www.amfone.net
>> >> AMRadio mailing list
>> >> List Rules (must read!): http://w5ami.net/amradiofaq.html
>> >> List Home: http://mailman.qth.net/mailman/listinfo/amradio
>> >> Help: http://mailman.qth.net/mmfaq.html
>> >> Post: mailto:AMRadio at mailman.qth.net
>> >> To unsubscribe, send an email to amradio-request at mailman.qth.net with
>> >> the word unsubscribe in the message body.
>> >>
>> >
>> > ______________________________________________________________
>> > Our Main Website: http://www.amfone.net
>> > AMRadio mailing list
>> > List Rules (must read!): http://w5ami.net/amradiofaq.html
>> > List Home: http://mailman.qth.net/mailman/listinfo/amradio
>> > Help: http://mailman.qth.net/mmfaq.html
>> > Post: mailto:AMRadio at mailman.qth.net
>> > To unsubscribe, send an email to amradio-request at mailman.qth.net with
>> > the word unsubscribe in the message body.
>> >
>>
>> ______________________________________________________________
>> Our Main Website: http://www.amfone.net
>> AMRadio mailing list
>> List Rules (must read!): http://w5ami.net/amradiofaq.html
>> List Home: http://mailman.qth.net/mailman/listinfo/amradio
>> Help: http://mailman.qth.net/mmfaq.html
>> Post: mailto:AMRadio at mailman.qth.net
>> To unsubscribe, send an email to amradio-request at mailman.qth.net with
>> the word unsubscribe in the message body.
>>
>
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
> 



More information about the AMRadio mailing list

This page last updated 23 Oct 2017.