[AMRadio] Using Heath SB 610 Monitor Scope to monitor


Phil LaMarche plamarc1 at tampabay.rr.com
Mon Feb 11 11:24:25 EST 2008


Speaking of SB 610's, I have a SB-614 for sale that looks like new.  It's
just beautiful.  Have no idea it's worth, so a fair offer will be accepted.

Phil 


Philip LaMarche 
LaMarche Enterprises, Inc.
www.instantgourmetspices.com 
www.w9dvm.com 
800-395-7795 pin 02 
727-944-3226 
FAX 727-937-8834 
NASFT 30210 
W9DVM 
  


-----Original Message-----
From: amradio-bounces at mailman.qth.net
[mailto:amradio-bounces at mailman.qth.net] On Behalf Of EP Swynar
Sent: Monday, February 11, 2008 11:17 AM
To: Discussion of AM Radio in the Amateur Service
Subject: Re: [AMRadio] Using Heath SB 610 Monitor Scope to monitor
modulationonAM transmitter

Hi John,

The SB-610 has been an absolutely invaluable aid here at my stations, in
both the CW and voice modes (AM, as well as SSB)...

All I do when monitoring 'phone transmissions here  is to place the 'scope
into a trapezoidal pattern.

I adjust the vertical gain such that a carrier makes the line about 2/3 the
height of the screen, or so, and the horizontal gain is set so that the
modulated triangle is about as equilateral as it can be...

When modulating 100%, the pattern should, indeed, be a full, equilateral
triangle.

One thing that I neglected to do until YEARS later was to pull the top RH
knob out --- that's the one marked "CLAMP" --- whenever using the
trapezoidal feature: by doing this, there is no image on the face of the
scope until you key-up your transmitter. If you leave the knob "in" all the
time, you'll eventually get a spot "burned" into the inside face of the CRT,
like I did with mine here...

The clamp feature keeps the point deflected off-screen into the RH side of
the CRT --- as soon as you hit the transmit button on your rig, the line
zips out from the right, to the centre of the tube, like magic...!

Chalk one up on the importance of reading the instructions first, not later!
Hi Hi.

~73~ Eddy VE3CUI - VE3XZ


****************************************



. I can't recall the name of the control because the scop
----- Original Message -----
From: "John King" <k5pgw at yahoo.com>
To: <amradio at mailman.qth.net>
Sent: Monday, February 11, 2008 10:39 AM
Subject: [AMRadio] Using Heath SB 610 Monitor Scope to monitor modulation
onAM transmitter


> Anyone experienced at using Heath SB 610 Monitor Scope
> to monitor the modulation pattern of the outgoing
> signal of an AM transmitter?
>
> I need to have session  to discuss the application of
> the SB 610 to that operation.
>
> Please email me directly for such a discussion. Your
> assistance in understanding the application and
> process will be greatly appreciated. Thanks and 73,
> John, K5PGW
>
>
>
____________________________________________________________________________
________
> Be a better friend, newshound, and
> know-it-all with Yahoo! Mobile.  Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.

______________________________________________________________
Our Main Website: http://www.amfone.net
AMRadio mailing list
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:AMRadio at mailman.qth.net
To unsubscribe, send an email to amradio-request at mailman.qth.net with
the word unsubscribe in the message body.



More information about the AMRadio mailing list

This page last updated 18 Dec 2017.