[AMRadio] Using Heath SB 610 Monitor Scope to


Bob Macklin macklinbob at msn.com
Mon Feb 11 19:20:15 EST 2008


I think you have the SB-610 and SB-614 confused with the SB-620 Panadapter.

What you state is true of the SB-620.

Bob Macklin
K5MYJ
Seattle, Wa,
"Real Radios Glow in the Dark"
----- Original Message -----
From: "Jim Wilhite" <w5jo at brightok.net>
To: "Discussion of AM Radio in the Amateur Service"
<amradio at mailman.qth.net>
Sent: Monday, February 11, 2008 3:49 PM
Subject: Re: [AMRadio] Using Heath SB 610 Monitor Scope to
monitormodulationonAM transmitter


> To anyone considering an SB 610 or 614, keep in mind they must be
> constructed to match the IF frequency of the receiver to which they will
> be interfaced.
>
> Some of them were built to work with the Heath receivers with the 3 meg
> IF and those that were built for 455 Kc. had the coils that would do so.
>
> If you find one for with the 3 Kc IF coils, it won't work properly with
> a NC 300 or NC 183D for example.  Heath packaged the coils for both with
> the units and the builder chose which he wanted.  I doubt you will
> receive the coils that were not used during construction.   Check them
> out before you find you have something that won't work with your
> receiver.
>
> Jim/W5JO
>
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
>



More information about the AMRadio mailing list

This page last updated 18 Dec 2017.