[AMRadio] 6V6 vs. 6L6

jeremy-ca km1h at jeremy.mv.com
Wed Feb 13 18:12:57 EST 2008

They plug pin to pin into the same socket but what is your application? For 
starters the filament current is higher in the 6L6. At the same B+ voltage 
they can be driven to higher plate current also.


----- Original Message ----- 
From: "Bob Peters" <rwpeters at swbell.net>
To: "AM" <amradio at mailman.qth.net>
Sent: Wednesday, February 13, 2008 3:42 PM
Subject: [AMRadio] 6V6 vs. 6L6

> Hi guys...Is the 6V6 and 6L6 interchangeable??? Small question  HI!!
> Very Best 73's
> Bob W1PE
> The Voice of Mesquite
> www.w1pe.com
> "Money is only temporary, but radios are forever" - Jim Little aka "the
> old dog"/K5BAI
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.

More information about the AMRadio mailing list

This page last updated 23 Feb 2018.