[AMRadio] DX100B


Bob Macklin macklinbob at msn.com
Tue Apr 28 12:50:28 EDT 2009


Yes the DX-100B was setup to be used with what became the SB-10 SSB adapter.

Bob Macklin
K5MYJ
Kent (Seattle), Wa,
"Real Radios Glow in the Dark"

----- Original Message ----- 
From: "CL in NC" <mjcal77 at yahoo.com>
To: <amradio at mailman.qth.net>
Sent: Tuesday, April 28, 2009 9:16 AM
Subject: [AMRadio] DX100B


>
> Does anybody know if the DX100B was planned to be used with a SSB adaptor
sometime in the future by Heath?  The one I have has a fuse installed to
power a 12 volt xfmr for the PTT, and it is in a hole that is obviously
punched by Heath for an SO239.  There is another SO239 installed near the
normal antenna output, with sheet metal screws, I think some previous owner
intended to put in an antenna xfr relay.  The schematic I have, which is for
the DX100, the model with the big cabinet, but the small knobs unlike the
first DX100, does not show any SSB cabling.
>
> Charlie, W4MEC in NC
>
>
>
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



More information about the AMRadio mailing list

This page last updated 24 Oct 2017.