w3slk at verizon.net
Tue Apr 28 19:47:26 EDT 2009
There should be 3 SO-239 connectors: 2 for the SoB-10 and 1 for the antenna.
There should be and extra switch usually mounted near the lower right hand
corner of the front panel.
----- Original Message -----
From: "CL in NC" <mjcal77 at yahoo.com>
To: <amradio at mailman.qth.net>
Sent: Tuesday, April 28, 2009 12:16 PM
Subject: [AMRadio] DX100B
Does anybody know if the DX100B was planned to be used with a SSB adaptor
sometime in the future by Heath? The one I have has a fuse installed to
power a 12 volt xfmr for the PTT, and it is in a hole that is obviously
punched by Heath for an SO239. There is another SO239 installed near the
normal antenna output, with sheet metal screws, I think some previous owner
intended to put in an antenna xfr relay. The schematic I have, which is for
the DX100, the model with the big cabinet, but the small knobs unlike the
first DX100, does not show any SSB cabling.
Charlie, W4MEC in NC
Our Main Website: http://www.amfone.net
AMRadio mailing list
Searchable Archives: http://firstname.lastname@example.org/
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Post: AMRadio at mailman.qth.net
To unsubscribe, send an email to amradio-request at mailman.qth.net with
the word unsubscribe in the message body.
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the AMRadio mailing list
This page last updated 14 Dec 2017.