|[AMRadio] Collins 32V1|
Brett.Gazdzinski at verizon.net
Thu Aug 5 21:21:42 EDT 2010
What drops off, high voltage, drive, or just plate current?
If its just the plate current, check the screen voltage on the final.
Could also be a gassy final tube.
----- Original Message -----
From: "Mark & Paula" <kc5ygc at hotmail.com>
To: <AMRadio at mailman.qth.net>
Sent: Monday, August 02, 2010 11:20 AM
Subject: [AMRadio] Collins 32V1
> Thanks for the help with the hot microphone problem resolved. Now I have a
> transmit problem it will tune up and transmit then falls off, wait 5
> minutes or so it will go back to transmitting and then loose carrier
> I have it mounted in a rack enclosure and the side panel near the final
> gets pretty hot. I placed a muffin fan near it thinking this may help no
> such luck I don't think it's the heat now any ideas? thanks
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Searchable Archives: http://firstname.lastname@example.org/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the AMRadio mailing list
This page last updated 20 Oct 2017.