[AMRadio] DX 60 mods

Ken Sands ken.sands at cavtel.net
Fri Jul 2 16:06:03 EDT 2010

Use the plate modulator it should work fine with a D-104.  Good luck!

Ken K8TFD 3880 AM 1880 AM

On 7/2/10, RICHARD GEORGE <k6kwq at msn.com> wrote:
> I have my DX 60 now working properly in a stock condition. It is a fairly
> clean radio inside and out, but I'm not concerened about modifying it.  I
> would like to keep from drilling holes in the front panel but will if
> necesarry.  I have come across 3 different audio mods on the net. They are
> the WC3K mod,  KS3K mod, and the K4TLJ mod. In the groups opinon wich is
> the
> best one to use?
> Maybe it is none of the above and I should just go ahead and plate moulate
> it.  I do have a 35 watt plat modulator that I built some time ago and it
> has a universal modulation transformer.
> I plan on using a D104 mike, and have a National 300 for a recevier.
> Thanks.
> K6KWQ Dick
>   Amps by "MORE POWER"
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

More information about the AMRadio mailing list

This page last updated 20 Feb 2018.