|[AMRadio] DX 60 mods|
ted.gustafson at gmail.com
Fri Jul 2 16:19:43 EDT 2010
I for one like to just leave things alone. One of the things I try and do
when I bring a old dog back to life I try and remove all the thing folks did
over the years to "make it better". Sometimes things just can't be undone or
I figure it is not worth the time and effort. If you find the right mic and
adjust the rig as it should it will sound fine. Good clean intelligible
audio. Then there are folks like the guy in the TV add talking about his
tube amp, "It will reproduce sounds only a dog can hear". You can get
carried away. And I am not saying I have NEVER modified a rig. 30 years from
now some guy will look at one of them and say, "Why would anyone do
something like that to a nice old vintage rice box like that. But I did
draw the line at putting extra holes in it.
I have had better luck with a D104 than any of the other dozen or so mics I
have tried on the older rigs. It seem to like my voice better. Every one of
the mics I have has its own "sound".
Good luck and have fun.
On Fri, Jul 2, 2010 at 12:32 PM, RICHARD GEORGE <k6kwq at msn.com> wrote:
> I have my DX 60 now working properly in a stock condition. It is a fairly
> clean radio inside and out, but I'm not concerened about modifying it. I
> would like to keep from drilling holes in the front panel but will if
> necesarry. I have come across 3 different audio mods on the net. They are
> the WC3K mod, KS3K mod, and the K4TLJ mod. In the groups opinon wich is
> best one to use?
> Maybe it is none of the above and I should just go ahead and plate moulate
> it. I do have a 35 watt plat modulator that I built some time ago and it
> has a universal modulation transformer.
> I plan on using a D104 mike, and have a National 300 for a recevier.
> K6KWQ Dick
> Amps by "MORE POWER"
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Searchable Archives: http://firstname.lastname@example.org/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the AMRadio mailing list
This page last updated 22 Feb 2018.