[AMRadio] Introduction and parts source needed


jon baker ad5hr1 at yahoo.com
Thu Jul 29 19:05:58 EDT 2010


     Steve,
   What size are these resistors?
   I have a few, some NOS, some used, but they range from
  1/2" dia. and 6" long to 14" long and 1.5" dia.
   These are the ones that "clip" into holders like large
  fuses?
   Welcome, and hope we can help.
       AD5HR, Jon
       

--- On Thu, 7/29/10, Jim Wilhite <w5jo at att.net> wrote:

> From: Jim Wilhite <w5jo at att.net>
> Subject: Re: [AMRadio] Introduction and parts source needed
> To: "Discussion of AM Radio in the Amateur Service" <amradio at mailman.qth.net>
> Date: Thursday, July 29, 2010, 4:07 PM
> Hi Steve and Welcome aboard:
> 
> Are you looking for the resistors that snap into clips or
> do you want 
> those with ends that will accept wire?  Mouser has
> power resistors and 
> so does Allied or Newark electronics, just hand on to your
> wallet for it 
> is about to get flatter.
> 
> http://www.mouser.com/
> 
> http://www.newark.com/
> 
> http://www.alliedelec.com/
> 
> I use Mouser most of the time because they don't have a
> minimum order. 
> Someone may come along who has other sources and I would
> check prices 
> from all before you order.
> 
> Hope you get that thing going soon and have great fun with
> it.
> 
> 73
> 
> Jim/W5JO
> ----- Original Message ----- 
> From: "Steve" <zarco at sonic.net>
> To: <amradio at mailman.qth.net>
> Sent: Thursday, July 29, 2010 2:53 PM
> Subject: [AMRadio] Introduction and parts source needed
> 
> 
> > Howdy,
> > I'm new to this forum and thought I'd introduce
> myself. After about
> > 30 years of inactivity I've been sorting through and
> restoring old 
> > radios
> > I've been collecting for years. A couple of years ago
> I bought a 
> > Technical
> > Radio Corp (not TMC) T-350XM AM/CW transmitter. This
> is a WWII
> > vintage, non-military monster. Almost 700 pounds and
> built like a 
> > tank.
> > Two 813's in the final and a pair of 805 modulators.
> After a lot of 
> > work
> > and quite a few component failures, it close to being
> put on the air.
> > Hope to meet some of you guys once its up and
> running.
> >
> > Most of the resistors in this thing have failed, and
> I'm sure those 
> > that
> > have not will soon. Does anyone know of a source for
> the big cartridge
> > type power resistors? An example is 15K ohm at 80
> watts. I've been 
> > able
> > to substitute in other resistors but I'm trying to
> keep this as 
> > original
> > as possible.
> >
> >               
>       Steve W6SSP
> >               
>       Santa Rosa, CA.
> >
> ______________________________________________________________
> > Our Main Website: http://www.amfone.net
> > AMRadio mailing list
> > Searchable Archives: 
> > http://www.mail-archive.com/amradio@mailman.qth.net/
> > List Rules (must read!): http://w5ami.net/amradiofaq.html
> > List Home: http://mailman.qth.net/mailman/listinfo/amradio
> > Post: AMRadio at mailman.qth.net
> > To unsubscribe, send an email to amradio-request at mailman.qth.net
> with
> > the word unsubscribe in the message body.
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html 
> 
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net
> with
> the word unsubscribe in the message body.
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 


      



More information about the AMRadio mailing list

This page last updated 11 Dec 2017.