[AMRadio] Introduction and parts source needed


Greg Mijal bluebirdtele at embarqmail.com
Fri Jul 30 22:40:37 EDT 2010


If you want I can dig out my stash of power resistors that may be pretty 
close to what you are looking for.
73's
Greg
WA7LYO
Kinston NC
----- Original Message ----- 
From: "Jim Wilhite" <w5jo at att.net>
To: "Discussion of AM Radio in the Amateur Service" 
<amradio at mailman.qth.net>
Sent: Thursday, July 29, 2010 5:07 PM
Subject: Re: [AMRadio] Introduction and parts source needed


> Hi Steve and Welcome aboard:
>
> Are you looking for the resistors that snap into clips or do you want
> those with ends that will accept wire?  Mouser has power resistors and
> so does Allied or Newark electronics, just hand on to your wallet for it
> is about to get flatter.
>
> http://www.mouser.com/
>
> http://www.newark.com/
>
> http://www.alliedelec.com/
>
> I use Mouser most of the time because they don't have a minimum order.
> Someone may come along who has other sources and I would check prices
> from all before you order.
>
> Hope you get that thing going soon and have great fun with it.
>
> 73
>
> Jim/W5JO
> ----- Original Message ----- 
> From: "Steve" <zarco at sonic.net>
> To: <amradio at mailman.qth.net>
> Sent: Thursday, July 29, 2010 2:53 PM
> Subject: [AMRadio] Introduction and parts source needed
>
>
>> Howdy,
>> I'm new to this forum and thought I'd introduce myself. After about
>> 30 years of inactivity I've been sorting through and restoring old
>> radios
>> I've been collecting for years. A couple of years ago I bought a
>> Technical
>> Radio Corp (not TMC) T-350XM AM/CW transmitter. This is a WWII
>> vintage, non-military monster. Almost 700 pounds and built like a
>> tank.
>> Two 813's in the final and a pair of 805 modulators. After a lot of
>> work
>> and quite a few component failures, it close to being put on the air.
>> Hope to meet some of you guys once its up and running.
>>
>> Most of the resistors in this thing have failed, and I'm sure those
>> that
>> have not will soon. Does anyone know of a source for the big cartridge
>> type power resistors? An example is 15K ohm at 80 watts. I've been
>> able
>> to substitute in other resistors but I'm trying to keep this as
>> original
>> as possible.
>>
>>                      Steve W6SSP
>>                      Santa Rosa, CA.
>> ______________________________________________________________
>> Our Main Website: http://www.amfone.net
>> AMRadio mailing list
>> Searchable Archives:
>> http://www.mail-archive.com/amradio@mailman.qth.net/
>> List Rules (must read!): http://w5ami.net/amradiofaq.html
>> List Home: http://mailman.qth.net/mailman/listinfo/amradio
>> Post: AMRadio at mailman.qth.net
>> To unsubscribe, send an email to amradio-request at mailman.qth.net with
>> the word unsubscribe in the message body.
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 



More information about the AMRadio mailing list

This page last updated 18 Dec 2017.