|[AMRadio] AM IARU Region 2 Bandplan|
collinsradio at comcast.net
Tue Mar 9 05:43:45 EST 2010
Only if you tell the world. "Hey, guys, I am running a KW-1 or a 20V-3 or a
homebrew pair of 4-1000s."
It's a little like the guy who bragged that he had a Porsche or Corvette had
never been driven over 60 mph. Sure!
David Knepper, W3ST/W3CRA
Publisher of the Collins Journal
Secretary of the Collins Radio Association
Nets: 14.263 Mhz, 1900Z, Sundays
3.805 Mhz, 2300Z, Mondays
----- Original Message -----
From: "Brett Gazdzinski" <Brett.Gazdzinski at verizon.net>
To: "Discussion of AM Radio in the Amateur Service"
<amradio at mailman.qth.net>
Sent: Monday, March 08, 2010 8:46 PM
Subject: Re: [AMRadio] AM IARU Region 2 Bandplan
> No, I bet you could run twice the legal power for years and no one would
> After all, how can you tell the difference between a good antenna or twice
> the power?
> ----- Original Message -----
> From: "D. Chester" <k4kyv at charter.net>
> To: <amradio at mailman.qth.net>
> Sent: Monday, March 08, 2010 7:05 PM
> Subject: Re: [AMRadio] AM IARU Region 2 Bandplan
>>> I have enough of a time keeping the BEASTs reined in at 1500W PEP. If I
>>> set the microphone resting current at the specified in the TM at 40ma,
>>> the darn thing WILL hit 2500W PEP.
>> There is nothing in Part 97 that says we even have to have instruments
>> capable of measuring PEP. They specifically deleted the provision
>> accurate power measuring instruments when they changed the power limit
>> rules, because in the Report and Order they admitted that many hams would
>> not be able to ACCURATELY measure output power.
>> If you are worried about the power you are running, just keep the DC
>> at 500 watts or less, or if you think you have good accurate rf power
>> measuring capability, run the carrier at 375 watts output. Check the
>> envelope pattern on a scope to make sure the negative peaks don't go over
>> 100% and that the positive peaks don't flat-top, and run the modulation
>> high as you can while still avoiding those extremes. I can't see why some
>> people are so nit-picky. If your signal is clean, nobody is going to come
>> busting down your door because an occasional voice peak exceeded a
>> Don k4kyv
>> This message was typed using the DVORAK keyboard layout.
>> Our Main Website: http://www.amfone.net
>> AMRadio mailing list
>> Searchable Archives: http://firstname.lastname@example.org/
>> List Rules (must read!): http://w5ami.net/amradiofaq.html
>> List Home: http://mailman.qth.net/mailman/listinfo/amradio
>> Post: AMRadio at mailman.qth.net
>> To unsubscribe, send an email to amradio-request at mailman.qth.net with
>> the word unsubscribe in the message body.
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Searchable Archives: http://email@example.com/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the AMRadio mailing list
This page last updated 16 Jan 2018.