|[AMRadio] Right angle drives and the signal hound|
kg4ojz at hotmail.com
Fri Dec 16 17:47:46 EST 2011
No problem with birdies on mine.
> From: qedconsultants at embarqmail.com
> To: amradio at mailman.qth.net
> Date: Fri, 16 Dec 2011 12:35:52 -0500
> Subject: Re: [AMRadio] Right angle drives and the signal hound
> I have been searching for a source of good right angle drives and seem to
> have found one at Torque Transmission, an Ohio co. ordered two of the
> double output shaft drives after talking to them. I need to gang two
> vacuum variable caps for a P-P amplifier and these should work. Not cheap,
> about $76 each.
> The signal hound looks interesting but seems to be more an item of test
> equipment and not really usable as a receiver as are some of the SDR guys.
> The signal hound shows +20dBm as the max allowable signal. and also shows
> sensitivaty as better than -160 dBm ! They do not say at what bandwidth, but
> it has to be at the tightest of 1/10 of a cycle BW. that is sure not
> usable for any communication. They also alude to what I used to call
> birdies. That is a problem with the SDR-IQ, as is the horrible audio out
> of that thing. It does make a nice band scope.
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Searchable Archives: http://firstname.lastname@example.org/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the AMRadio mailing list
This page last updated 16 Jan 2018.