|[AMRadio] (no subject)|
bcarling at cfl.rr.com
Tue Nov 12 07:23:04 EST 2013
Do you have the manual for the T150?
> On Nov 12, 2013, at 6:30 AM, john nelson <solarelectricjohn at gmail.com> wrote:
> I have a simple question that will be baseline fundamental for most of you
> but I have only been into AM for about a year. I than found a Eico 730
> external plate modulator amp and in the process of restoring it. The 730 is
> in quite nice condition and will be a good stepping stone into plate
> modulation and future projects. I plan on using it with a Knight T150 that
> has a pair of 6146 and it also has a plate modulation input plug on the
> rear of the unit. I do understand the drawbacks of the T150 VFO and do have
> a good selection of rocks.
> I need some help with the modulation transformer on the 730, It has taps
> from 0 ohms to 10 k and I just can't find enough information or the math
> involved on what tap I should use to hook it to the T150 plates. Any advice
> would be greatly taken I just don't want to smoke her the first time I
> power it up. Thanks John W0XAZ
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Archives: http://mailman.qth.net/pipermail/amradio/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the AMRadio mailing list
This page last updated 23 Nov 2017.