|[AMRadio] Monitoring Modulation Accurately CORRECTION|
rbethman at comcast.net
Fri Nov 15 13:14:07 EST 2013
I sent Bry a schematic of the portion of the DX-60 related to detecting
It is one of several mods to the DX-60 that have been published in ER.
All of these were done by Bill Breshears, WC3K, (SK), and are readily
available either through ER or some folks like my self.
The over modulation indicator for the DX-60 is a simple addition of a
couple zener diodes and an LED. Bill poked the LED through a front
panel existing screw hole.
Its use is very simple. If the LED flickers or flashes, you are over
Bill even added 160 mtrs to his DX-60. I know that one is also in ER.
They, in particular the over mod one is at the following link. (Ierred
in stating AMfone. It is on the amwindow.org site.
Bob - N0DGN
On 11/15/2013 12:25 PM, K5MYJ wrote:
> When using Controlled Carrier modulation PEAK POWER is important.
> As an example a DX-60 has an idling carrier power of about 12.5W. But
> voice peaks can reach as high as near 60W. Controlled Carrier can not
> go to ZERO!
> Bob Macklin
> Seattle, Wa.
> "Real Radios Glow In The Dark"
Our Main Website: http://www.amfone.net
AMRadio mailing list
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Post: AMRadio at mailman.qth.net
To unsubscribe, send an email to amradio-request at mailman.qth.net with
the word unsubscribe in the message body.
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the AMRadio mailing list
This page last updated 17 Nov 2017.