|[AMRadio] BC375 repair|
bguyger at yahoo.com
Mon Nov 25 23:55:03 EST 2013
Yeah that stuff is Glyptol (sp?) a WW II version of Locktite. You may be able to flood the shaft / knob bushing with something like Flux Remover from a spray can or MEK. I don't think Lacquer Thinner will do any good, just be careful not to get any solvent on the plastic knob.....
On Monday, November 25, 2013 7:43 PM, CL in NC <mjcal77 at yahoo.com> wrote:
Anybody know how to take apart the BC375 Ant. Inductance Tuning control 'M'? The mechanism on mine was working just fine until last night and now is just about impossible to turn. Removed the center screw on the control, but the knob will not come off the shaft, looks like it was affixed with an adhesive along with a screw.. It does not appear that the inductor itself is causing all the friction, just the geared control, and no, the dial lock is not on, unless it is stuck inside even with the locking screw loose.
Charlie, W4MEC in NC
Our Main Website: http://www.amfone.net/
AMRadio mailing list
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Post: AMRadio at mailman.qth.net
To unsubscribe, send an email to amradio-request at mailman.qth.net with
the word unsubscribe in the message body.
This list hosted by: http://www.qsl.net/
Please help support this email list: http://www.qsl.net/donate.html
More information about the AMRadio mailing list
This page last updated 23 Nov 2017.