[AMRadio] AMRadio Digest, Vol 118, Issue 59


roy nollkamper nollkamper47 at hotmail.com
Tue Nov 26 12:55:38 EST 2013


RE:  Information on schematic for Canadian Marconi CSR-2.
I have a friend in Alberta who has a CSR-2 and I will contact him this evening (Nov 26) so see if he has a schematic and or manual for the receiver.
Roy, K7JAQnollkamper47 at hotmail.com

> From: amradio-request at mailman.qth.net
> Subject: AMRadio Digest, Vol 118, Issue 59
> To: amradio at mailman.qth.net
> Date: Tue, 26 Nov 2013 12:00:07 -0500
> 
> Send AMRadio mailing list submissions to
> 	amradio at mailman.qth.net
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://mailman.qth.net/mailman/listinfo/amradio
> or, via email, send a message with subject or body 'help' to
> 	amradio-request at mailman.qth.net
> 
> You can reach the person managing the list at
> 	amradio-owner at mailman.qth.net
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of AMRadio digest..."
> 
> 
> Today's Topics:
> 
>    1. Re: Canadian Marconi CSR 2 (jim.n.wooten at juno.com)
>    2. BC375 repair (CL in NC)
>    3. WTD ,  Johnson 122  VFO  front panel (k4deejim at aol.com)
>    4. Re: BC375 repair (Bill Guyger)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Mon, 25 Nov 2013 19:00:34 GMT
> From: "jim.n.wooten at juno.com" <jim.n.wooten at juno.com>
> To: amradio at mailman.qth.net
> Subject: Re: [AMRadio] Canadian Marconi CSR 2
> Message-ID: <20131125.130034.3869.0 at webmail15.vgs.untd.com>
> Content-Type: text/plain; charset=windows-1252
> 
> Wayne,
> Post a query on the www.antiqueradios.com site in the Electrical/Mechanical Restoration forum. This site attracts antique radio enthusiasts from around the world.  Note in the archives several queries about diagrams for Canadian radios have been responded to  sucessfully  by forum readers.
> 
> 73, Jim W5COA
> ---------------
> Today's Topics:
> 
>    1. info for Canadian Marconi CSR 2 (ssaw at mchsi.com)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Sun, 24 Nov 2013 18:47:11 -0600 (CST)
> From: ssaw at mchsi.com
> To: AMRadio at mailman.qth.net
> Subject: [AMRadio] info for Canadian Marconi CSR 2
> Message-ID:
> 	<2532123.528181385340431686.JavaMail.root at dsmdc-mail-mbs14>
> Content-Type: text/plain; charset=utf-8
> 
> I am looking for a schematic for the Canadian Marconi CSR 2 HF receiver circa 1936. I have looked, searched and asked for one for years with NL and thought I would try one more time before I do it the hard way and draw it out by hand point by point. Hi Hi. Any help would be appreciated.
> Thanks 
> 
> Wayne, N0TE
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> ------------------------------
> 
> Message: 2
> Date: Mon, 25 Nov 2013 11:46:46 -0800 (PST)
> From: CL in NC <mjcal77 at yahoo.com>
> To: "amradio1 at mailman.qth.net" <amradio at mailman.qth.net>
> Subject: [AMRadio] BC375 repair
> Message-ID:
> 	<1385408806.95886.YahooMailBasic at web160602.mail.bf1.yahoo.com>
> Content-Type: text/plain; charset=us-ascii
> 
> Anybody know how to take apart the BC375 Ant. Inductance Tuning control  'M'?  The mechanism on mine was working just fine until last night and now is just about impossible to turn.  Removed the center screw on the control, but the knob will not come off the shaft, looks like it was affixed with an adhesive along with a screw..  It does not appear that the inductor itself is causing all the friction, just the geared control, and no, the dial lock is not on, unless it is stuck inside even with the locking screw loose.
> 
> Charlie, W4MEC in NC
> 
> 
> ------------------------------
> 
> Message: 3
> Date: Mon, 25 Nov 2013 20:33:32 -0500 (EST)
> From: k4deejim at aol.com
> To: AMRadio at mailman.qth.net
> Subject: [AMRadio] WTD ,  Johnson 122  VFO  front panel
> Message-ID: <8D0B85EA6C3A8D6-770-769CD at webmail-m168.sysops.aol.com>
> Content-Type: text/plain; charset="us-ascii"
> 
> 
> I'm looking for a 122 VFO front panel in fair condition to go with a fair condition Viking 1 . A  slight chipping around the edge and no extra holes would be acceptable.
> Tnx,Jim-K4DEE
> 
> 
> ------------------------------
> 
> Message: 4
> Date: Mon, 25 Nov 2013 20:55:03 -0800 (PST)
> From: Bill Guyger <bguyger at yahoo.com>
> To: CL in NC <mjcal77 at yahoo.com>,	"amradio1 at mailman.qth.net"
> 	<amradio at mailman.qth.net>
> Subject: Re: [AMRadio] BC375 repair
> Message-ID:
> 	<1385441703.38670.YahooMailNeo at web125303.mail.ne1.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
> 
> Yeah that stuff is Glyptol (sp?) a WW II version of Locktite. You may be able to flood the shaft / knob bushing with something like Flux Remover from a spray can or MEK. I don't think Lacquer Thinner will do any good, just be careful not to get any solvent on the plastic knob.....
> ?
> Bill AD5OL
> 
> 
> 
> On Monday, November 25, 2013 7:43 PM, CL in NC <mjcal77 at yahoo.com> wrote:
>   
> Anybody know how to take apart the BC375 Ant. Inductance Tuning control? 'M'?? The mechanism on mine was working just fine until last night and now is just about impossible to turn.? Removed the center screw on the control, but the knob will not come off the shaft, looks like it was affixed with an adhesive along with a screw..? It does not appear that the inductor itself is causing all the friction, just the geared control, and no, the dial lock is not on, unless it is stuck inside even with the locking screw loose.
> 
> Charlie, W4MEC in NC
> ______________________________________________________________
> Our Main Website: http://www.amfone.net/
> AMRadio mailing list
> Archives: http://mailman.qth.net/pipermail/amradio/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
> 
> This list hosted by: http://www.qsl.net/
> Please help support this email list: http://www.qsl.net/donate.html
> 
> ------------------------------
> 
> ______________________________________________________________
> AMRadio mailing list
> Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> 
> 
> End of AMRadio Digest, Vol 118, Issue 59
> ****************************************
 		 	   		  


More information about the AMRadio mailing list

This page last updated 24 Nov 2017.