|[AMRadio] Kenwood Items FS|
Ken Simpson, W8EK
kenw8ek at gmail.com
Fri Aug 22 13:07:54 EDT 2014
Kenwood and related Items For Sale:
Dual Band FM Transceiver, Two meter muti-mode transceiver,
Dual Band HT, Microphones, Original Box, Coaxial Antenna
Switches, HT Accessories, Noise Filter, Original Manuals,
Kenwood TM G-707 A Dual Band Transceiver:
The TM-G 707 has an extra-large control panel with the welcoming
glow of its amber-colored LCD. The TM-G 707 is extraordinarily
user-friendly, which is an important consideration for a mobile
rig. This mobile transceiver provides 50 (50/10/5W) watts on 2
meters and 35 (35/10/5W) watts on 440 MHz. The TM-G707A offers
features such as memory name function (7 character), S-meter
squelch, time-out timer, tone encode/decode, dimmer, and auto
power-off. Non-simultaneous cross-band repeater access is
supported. A 6 pin mini DIN connector for 1200/9600 bps packet
and other digital modes is provided.
Receive coverage is 118-174 and 410-524 MHz F3E (FM).
Transmit range is 144-148 and 430-450 MHz F3E (FM).
Size is 5.5 x 1.7 x 7.4 inches. It requires 13.8 VDC at 11 amps.
180 Alpha Memories
DTMF Hand Mic.
Auto Repeater Offset
Time Out Timer
Auto Simplex Checker
DTSS Selective Call
Packet 1200/9600 DIN plug
Hi/Med/Lo RF Out
This particular unit is still in its original box. It functions
100%, and looks the same. As best I can tell, all of the little
packages of screws, fuses, etc. are included. $250
Kenwood TS-711, multimode 2 meter transceiver:
This unit is an FM, SSB, and CW transceiver for 2 meters. It
has 40 memory channels, and up to 25 Watts of output power,
which is continuously variable (no Hi or Low switch, but a
front panel control to continuously vary power). Of course
it will scan, and do the things one expects in a 2 meter rig.
It has a GASFET in the front end for one of the best receivers
I have ever used. The 120 V AC power supply as well as 13 V DC,
is built in. The case looks very similar to a TS-440 or TS-450
This particular unit is very nice. I do not find any scratches,
but it does show slight use. It has the optional TU-5 subaudible
tone PL encoder in it, so it can be used with modern repeaters.
Power cord and mic are included, with paper work, for $425.
Kenwood TH-78 A Dual Band HT:
The Kenwood TH-78A is a sophisticated dual-band HT. It has
built in tone and paging functions, alphanumeric memory and
message paging. Additionally it has dual-frequency receive
capability (including VHF+VHF and UHF+UHF). There are 50
memory channels. The operator can choose from 8 different
scan types. DTSS allows DTMF access to the transceiver.
The receive range is 118-173.995 and 438-449.995 MHz.
It has three RF output levels of about 5.0/0.5/0.02 watts.
Two Line LCD Display
Cross Band Operation
Multi Scan Function
This one works fine, and looks fine. It includes the HT,
rubber duck antenna, wall charger, and paper work.
A PB-13 standard battery is included, that holds its charge
fine. Also included are two PB-17 heavy duty packs that are
in bad condition. $135
Kenwood MC-60 A Deluxe Desk Microphone:
The Kenwood MC-60A has been a popular desk mic among
Kenwood owners for many years. It has a communication
type dynamic unidirectional moving coil type mic element
and features UP-DOWN tuning (on compatible Kenwood
transceivers) plus a built-in pre-amp. There is a
switch for PTT (push to talk) and also a lock feature.
The mic impedance may be set for 50K ohms or 500 ohms.
The frequency response is 150 Hz to 10 kHz (-6dB) with
the Preamp off and 200 Hz to 7 kHz (-6 dB) with the Preamp
The heavy zinc die-cast base provides extra stability. The
mic terminates to a standard 8 pin mic plug. The preamp
requires two AA cells which are mounted through the bottom
of the base. Please note that the earlier MC-60 (non-"A")
version featured a 4 pin mic plug and did not have UP-DOWN
This one works 100% and looks very close to new.
With paper work for $100.
Hand Microphone with round 8 pin plug for Kenwood, Alinco, etc.
This hand mic works great on most Kenwood rigs with the
round 8 pin connector, such as the TS-430, TS-440, TM-241,
TM-2530, TW-4000, and others, including Alinco and ADI.
It says "Electret Condenser Mic" on the back, and
"Kenwood" on the front, with no model number.
Basically, this mic functions like an MC-43, with a couple
more features. It has the mic and PTT switch; it also has
up/down switches on the top. There are four "extra" buttons
labeled Call, VFO, MR, and PF. What these four buttons do
depends on the rig. There is also a "Lock" switch on the back.
Regardless if you use the four extra buttons or not, you
still have a mic that works like an MC-43.
This mic works fine, and looks like new. I am guessing it
came with a rig, and was immediately put in the drawer,
and never used. $30
Original Boxes for Kenwood VHF / UHF Rigs:
The following original boxes for Kenwood equipment
are available. They are all in very nice condition,
and include the molded styrofoam inserts to protect
the rig, plus the box itself.
Kenwood TM-221 two meter transceiver $5
Antennas for your HT:
All rubber ducks are for 2 meters, are in good
condition, and are $10 each, unless stated otherwise.
BNC - Dual Band (2 m and 440 MHz) Telescoping antenna
provides significant gain when extended, $18
BNC - As used on most HTs, 7 inches long
BNC - Original Alinco EA0024, about 4 inches long
BNC - Original from Kenwood TH-215, about 5 inches long
BNC - "Stubby" about 4 1/2 inches long
Type F connector - 6.5 inches long
BNC Stubby for 440 MHz, 3 inches long
Threaded (as used by Motorola, etc.) stubby for 440 MHz
Not a Rubber Duck, but can be used on your HT:
Telescoping Antenna w/ BNC about 19 inches long
can be used as a quarter wave antenna on 2 m,
or on 220, or 450 MHz if telescoped shorter. $12
Accessories for the Kenwood TH-21 / 31 / 41 series HTs:
Antenna adapter that fits the TH-21 series HTs, and has
an SO-239 on the other end, to accept a PL-259. $5
Antenna adapter that fits the TH-21 series HTs, and has
a BNC on the other end. $8
Kenwood SC-8 T "Soft Case" for any of the TH-21 series HTs
great condition $12
Original Operating manual for TH-21 HT for 2 meters $8
Kenwood W09-0315 charger
This charger is used to charge the larger PB-21 H batteries
for the TH-21 series, and also on other Kenwood radios.
It has a standard 2.1 mm coaxial connector. $12
HT Belt Clips and Wrist Straps:
All include the hardware with the belt clip and are $6 each.
Icom IC-2 AT
Wrist Straps for various HTs - $4 each
Kenwood TH-215 / 225 / 415, TR-2500, etc.
Two position "Strip Line" Coax Switches:
These switches utilize metal cavity construction for max efficiency
and high isolation. Isolation is better than 50 dB at 300 MHz
with low insertion loss less.
All are two position and are typically rated for 2500 W PEP,
and good to 600 MHz.
Diawa CS-201 - $22
Opek CX-201 - $22
MFJ 1702 C - With center position that grounds both antennas,
and added lightning protection. $25
APC "Pro 7" Noise Filter and Surge Suppressor:
This unit has 7 outlets, with a 6 foot cord, and provides
surge suppressor for your equipment. It also provides
noise filtering / EMI / RFI suppression of 60 db. There
is $75,000 worth of insurance included. It comes with a
lifetime warranty, and I think this is APC's "Top of the
Detailed specs can be found at
This one appears to be new, unused, in its original box. $18
Original Manuals for Kenwood equipment:
All manuals are in very nice condition, for Kenwood equipment.
All are Operating manuals unless otherwise specified.
All are original manuals only.
Buy two, three, or four of my books/manuals, and take 10% off.
Buy five or more and take 20% off.
TH-21 HT for 2 m, $8
TH-215/315/415 HT for 2 m, 220 MHz, or 440 MHz, $10
TH-225, 2 m HT, $12
TH-235, 2 m HT, $15
TH-241/441/541 mobile FM transceivers
...For 2 m, 440 MHz, & 1200 MHz, $12
TM-221/421 2 m or 440 MHz mobile, $12
TM-261/461 2m or 440 MHz mobile, $12
TM-2570/2550/2530 2 m mobile, $15
TR-2400, 2 m HT, $12
Service manual for TR-2600, 2 m HT, $12
TR-9000, 2 m multimode, $12
TS-120 S/V, HF xcvr, $20
TW-4000 dual bander mobile, $15
Service manual for TW-4000 dual bander $20
TW-4100 dual band mobile, $15
BC-5 DC to DC quick charger $2
LF-30A Low Pass Filter $5
MC-30 & MC-35 hand microphones $4
MS-1 mobile stand $3
PB-1, PB-2, PB-3, & PB-4 battery packs $3
PB-24 battery pack for TR-2400 $2
PB-25 H battery pack for TR-2500 $2
PS-6 power supply $5
PS-30 power supply $4
SMC-24 speaker mic $3
SMC-25 speaker mic $3
SP-430 speaker $2
SP-820 Speaker $2
These are original Kenwood manuals only.
Versión en español de Kenwood TM G-707 manual de Venta:
Versión en español del Manual de Operación
para el Kenwood TM G-707 transmisor-receptor de banda dual
Este es el manual de instrucciones original, en español.
Parece que es bastante extensa y detallada.
Es básicamente nuevo, sólo se abre para observar que
es sólo en español. Es original de Kenwood.
$ 8 más gastos de envío de la Florida.
Spanish Version of Kenwood TM G-707 manual:
Spanish version of the Operating Manual
for the Kenwood TM G-707 dual band transceiver
This is the original operating manual only, in Spanish.
It looks like it is quite extensive and detailed.
It is basically new, only being opened to observe that
it is in Spanish only. It is original from Kenwood. $8
I also have many other accessories available such as many
different types of microphones, HTs, HF, VHF and UHF rigs, HF
and VHF/UHF antennas, etc.
Just too many to list here. Please e-mail your requests.
Prices do not include shipping from Florida.
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400
More information about the AMRadio mailing list
This page last updated 17 Nov 2017.